User Manual

Packing list

Packing list for one pair of safe futsal goals:

  • Main carton – 2 cartons
  • Side poles (shrink wrapped) – 2 pcs
  • Nets – 1 bag

Each carton contents:

  • Crossbar – 1 pc
  • Post – 2 pcs
  • Backbar – 1 pc
  • Lower side poles – 2 pcs
  • Angle joint (black) – 2 pcs
  • Angle joint (silver) – 2 pcs
  • Side pole bracket – 2 pcs
  • Net attachment rope (white) – 1 pc
  • Fasteners bag – 1 pc

Fasteners bag contents:

  • Bolts M6x40 – 8 pcs
  • Bolts M8x15 – 8 pcs
  • Bolts M8x60mm – 6 pcs
  • Washers – 12 pcs
  • Nuts M8 – 6 pcs
  • Spare nets hooks
  • Spare rubber finger protectors

Side poles wrap:

  • Two side poles

Tool of necessity:

  • Knife
  • Hex key M6
  • Hex key M8
  • Wrench key 1/2

Step 1. Unboxing

  1. Use the knife to cut the scotch tape and open the cartons.
  2. Unwrap posts, crossbar, side poles and fasteners bag using the knife. Be careful while unwrapping the crossbar and poles – do not damage the PVC-cover with the knife.
  3. Utilize wrapping after unboxing.

Step 2. Crossbar-posts jointing

  1. Insert Angle joint (black) and Angle joint (silver) into the left side of the crossbar as shown on the picture below.
  2. Insert bolts to fix both angle joints in the crossbar. Do not tighten the bolts.
  3. Attach left post to the crossbar inserting both angle joints into the post.

  1. Insert bolts to fix both angle joints in the post.
  2. Tighten all bolts using the hex key.

  1. Repeat steps 1-5 for right post.

Step 3. Side poles assembly

  1. Install side pole bracket on the left crossbar-post joint as shown on the picture. Make sure the holes in the bracket positioned towards the post (perpendicular to the crossbar)
  2. Install the bolts with washers.

  1. Tighten the bolts.
  1. Insert one side pole into the pole bracket.

  1. Fix the pole with bolt, washer and nut. Do not tighten the bolt.
  2. Repeat 1-5 for the right side.
  3. Unscrew two bolts from the bottom of the left post. See picture below.
  4. Install lower side pole.

  1. Tighten the bolts.
  2. Repeat 7-8 for the right side.

Step 4. Backbar installation

  1. One person holds the backbar and attaches it to side poles: one hole of the backbar should match the hole of the side pole, another hole of the backbar should match the hole of the lower side pole.
  2. Second person fixes the backbar with bolts, washers and nuts.
  3. Tighten the bolts.
  4. Tighten the bolts of side poles brackets from Step 3.

Step 5. Net attachment

  1. Cut zip ties using the knife to unwrap the nets
  2. Put the net over the lying goals. Make sure the black rope ends are on the side poles bends as shown on the picture below. Make sure that thick wires of the net come along side poles.
  3. Attach the net to crossbar and post using preinstalled hooks. Start with the crossbar.

  1. Tighten the black rope between side poles.
  2. Use the net attachment rope (white) to fix the next to lower side poles and backbar as shown not be picture below.


Step 6. Start using the goals

  1. Flip the goals and place them on the court.
  2. Make sure the goals are anchored or sandbagged. We recommend at least 50lbs of sandbags per goal.
  3. .2..1.. GO PLAY FUTSAL!